Abstract:In order to analyze the influence of the preparation process parameters of the homogeneous system of spatial confining forced network assembly (SCFNA) on the electric and thermal conductivity of the composites, the 10% short cut fiber (SCF) was used as electric and thermal filler and polydimethylsiloxane was used as matrix. The influence of the refining speeds and mixing time on the electric and thermal conductivity of the composites was analyzed.The results show that when the refining speed is 40 r/min, the mixing time is shortened from 25 min to 5 min, the composites shear torqued in the Hakkie mixer, the electric and thermal conductivity of the composites are increased, the electrical conductivity is increased 58.46 times, the transmitted temperature at the same point is increased by 2 ℃. When the mixing time is shortened from 5 min to 3 min, the electrical conductivity of the material keeps unchanged. When the mixing time is 25 min, the refining speed decreases from 60 r/min to 40 r/min, the composites shear torqued in the Hakkie mixer, the electric and thermal conductivity of the composites are also increased gradually, the electrical conductivity is increased by 30.23 times, the transmitted temperature at the same point is increased by 4 ℃. By analyzing the change of the torque of the composites in the mixer, the refining speed and mixing time can be effectively controlled to improve the electric and thermal conductivity of the composites accurately.