同温度下天然橡胶/聚酯纤维界面的黏结失效
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Interfacial Adhesion Failure of Natural Rubber/Polyester Fibers at Different Temperatures
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用松香树脂作为增黏剂,制备了天然橡胶/聚酯纤维复合材料,并对其进行了3种不同温度的热老化处理,重点考察了经过不同温度的热老化处理后,使用H抽出法和扫描电镜观察法分析了复合材料的失效模式。结果表明,经过不同温度的热老化处理后,由于应力分布不同,出现了3种不同的失效模式:在110 ℃时,复合材料失效主要是橡胶/纤维的界面脱黏;在125 ℃时,复合材料同时发生界面脱黏和橡胶基体失效;在180 ℃时,复合材料主要发生橡胶基体失效。X射线光电子能谱测试结果显示,经过高温热老化后,橡胶表面的含氧官能团明显增加。

    Abstract:

    Natural rubber/polyester fiber composites were prepared by using rosin resin as tackifying agent. At three different temperatures, the failure modes of the composites were investigated by H-pull-out and scanning electron microscope(SEM). The results show that after thermal aging at different temperatures, there are three different failure modes. The failure at 110 ℃ is the debonding of the interface of rubber/fiber, and the failure at 125 ℃ is not only the interfacial debonding but also some damages of rubber matrix, while at 180 ℃, the failure is the rubber matrix damage. The results of X-ray photoelectron spectroscopy(XPS) show that the oxygen-containing functional groups on the rubber surface increase significantly after aging.

    参考文献
    相似文献
    引证文献
引用本文

张倩云,崔继文,刘 盼,赵艳菲,夏 童,韩晶杰,张军召.同温度下天然橡胶/聚酯纤维界面的黏结失效[J].高分子材料科学与工程,2019,35(11):62-66. Qianyun Zhang, Jiwen Cui, Pan Liu, Yanfei Zhao, Tong Xia, Jingjie Han, Junzhao Zhang. Interfacial Adhesion Failure of Natural Rubber/Polyester Fibers at Different Temperatures[J]. Polymer Materials Science & Engineering,2019,35(11):62-66.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司