Abstract:The effect of fiber contents on the properties of polytetrafluoroethylene(PTFE)/ceramic microwave composites was described. The microstructure, coefficient of thermal expansion and mechanical properties show that the fibers are mainly distributed along the X-Y plane after calendering process. With the increasing of fiber contents, the coefficient of thermal expansion and the tensile strength are improved obviously. But the microstructure, water absorption and density show that with the increasing of fiber contents, voids appear in the three-phase interface of polytetrafluoroethylene-fiber-ceramic, which leads to the poor property in water absorption, density and loss factor. When the content of the fiber increases to 3%, the properties of the substrate are the best: the dielectric property is 10.29, the dielectric loss is 0.0026, the water absorption ratio is 0.052%, the CTE of X/Y/Z is 0.0261‰/0.0278/0.0394‰/℃, the tensile strength gets to 11.80 MPa.