预制炭黑/尼龙6纤维网络在导电高分子复合材料中的逾渗行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51603193)


Percolation Behavior of Pre-Fabricated Carbon Black/Polyamide 6 Fibrous Networks in Conductive Polymer Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过超声法将炭黑(CB)粒子固定在静电纺丝尼龙6(PA6)纤维膜表面,制备出一系列具有不同CB含量的CB/PA6导电纤维薄膜。利用热压成型法将制备的导电纤维膜与高密度聚乙烯(HDPE)粉末热压复合,制备出CB/PA6/HDPE导电高分子复合材料(CPC)。扫描电子显微镜图片显示,CB粒子均匀地锚固在PA6纤维表面,且CB/PA6导电纤维膜在HDPE基体中形成连续的导电网络结构。研究了材料的导电逾渗行为,发现CB/PA6/HDPE复合材料的逾渗值仅为2.5%,显著低于传统的CB/HDPE复合材料的逾渗值(8.5%)。同时,由于CB/PA6/HDPE复合材料具有特殊的预制CB/PA6导电纤维网络状结构,PA6电纺纤维膜的含量在复合材料体系中也呈现出有趣的逾渗行为。

    Abstract:

    A series of carbon black (CB)/polyamide 6 (PA6) conductive nanofiber mats with different CB concentrations were fabricated by anchoring CB particles onto electrospun PA6 nanofibers through powerful ultrasonication. The nanofiber mats were then embedded into the high density polyethylene (HDPE) powder matrix to prepare CB/PA6/HDPE conductive polymer composites (CPC) by hot press molding. Scanning electron microscope (SEM) images reveal that the CB particles are strongly attached to the surface of PA6 nanofibers homogeneously, and the CB/PA6 conductive fibers mats constructed continuous conductive networks in the HDPE matrix. It can be seen from the percolation curves that the percolation threshold value of CB/PA6/HDPE composites is 2.5%, which is much lower than that of the conventional CB/HDPE (8.5%) CPC. It is noteworthy that an interesting percolation behavior of PA6 fibers content can be observed in CB/PA6/HDPE composites, which is ascribed to the special pre-fabricated CB/PA6 fibrous conductive network structure.

    参考文献
    相似文献
    引证文献
引用本文

周明博,李朝阳,李 勇,代 坤,刘春太.预制炭黑/尼龙6纤维网络在导电高分子复合材料中的逾渗行为[J].高分子材料科学与工程,2019,35(11):150-154. Mingbo Zhou, Zhaoyang Li, Yong Li, Kun Dai, Chuntai Liu. Percolation Behavior of Pre-Fabricated Carbon Black/Polyamide 6 Fibrous Networks in Conductive Polymer Composites[J]. Polymer Materials Science & Engineering,2019,35(11):150-154.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司