甲壳素-硅酸四乙酯膜的制备和性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31772856);宁波大学王宽城幸福基金


Preparation and Properties of Chitin-Tetraethyl Silicate Membranes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用N,N-二甲基乙酰胺(DMAC)和无水氯化锂(LiCl)溶解甲壳素,以丙酮为非溶剂通过液致相分离法制备甲壳素膜,利用硅酸四乙酯对甲壳素膜进行改性,选用扫描电子显微镜、能谱仪、傅里叶变换红外光谱仪对膜性能进行表征,并研究了甲壳素-硅酸四乙酯膜对牛血清蛋白(BSA)的过滤特性。结果表明, 5%LiCl/DMAC溶剂可以快速溶解甲壳素,纯甲壳素膜的收缩程度非常剧烈,而甲壳素-硅酸四乙酯膜收缩程度较小并具有较好的拉伸强度,对BSA有一定的截留效果,铸膜液中甲壳素的浓度对BSA的截留率有较大影响。当铸膜液中甲壳素浓度从1%增加到1.8%时,对BSA的截留率从23.6%增加到了75%。

    Abstract:

    Chitin was dissolved in N,N-dimethylacetamide (DMAC)/lithium chloride (LiCl) solution. Chitin-tetraethyl silicate (Chitin-TES) membranes were prepared by liquid phase separation method with acetone as non-solvent and modified with tetraethyl silicate. The membrane properties were characterized by scanning electron microscopy (SEM), EDS spectrometer and FT-IR spectrometer. The filtration properties of chitin-TES membrane on bovine serum albumin (BSA) were studied. The results show that 5% LiCl/DMAC solvent can dissolve chitin well. The shrinkage of pure chitin membrane is very strong, while the chitin-TES membranes shrink little and show good tensile strength. Chitin-TES membranes have a certain retention effect on BSA. The concentration of chitin in the casting solution has a great influence on the retaining rate of BSA. When the concentration of chitin in the casting solution is increased from 1% to 1.8%, the retention rate of BSA increases from 23.6% to 75%.

    参考文献
    相似文献
    引证文献
引用本文

吕 恺,卓 鸣,张 颖,张雪艳,陆 茵,史西志.甲壳素-硅酸四乙酯膜的制备和性能[J].高分子材料科学与工程,2019,35(11):155-160. Kai Lü, Ming Zhuo, Ying Zhang, Xueyan Zhang, Yin Lu, Xizhi Shi. Preparation and Properties of Chitin-Tetraethyl Silicate Membranes[J]. Polymer Materials Science & Engineering,2019,35(11):155-160.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司