高压条件下聚对苯二甲酸丁二醇酯熔体的流变行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2016YFB0302800);国家“十二五”科技支撑计划资助项目(2011BAE05B00);山东省高等学校科技计划项目(J17KB011);生态纺织教育部重点实验室(江南大学)课题(KLET1603);淄博市校城融合发展计划项目(2018ZBXC474);山东理工大学黄河三角洲研究院创新引导基金(2018-7);福建省纺织品检测技术重点实验室开放课题(2018-MXJ-02);化学工程与技术浙江省重中之重(一级)学科开放基金资助(YR2017006)


Rheological Behavior of Polybutylene Terephthalate Melt Under High Pressure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用毛细管流变仪及反向压力腔组件研究了高压条件下温度、压力和剪切速率等因素对聚对苯二甲酸丁二醇酯(PBT)熔体的流变行为影响规律。结果表明,随着温度的升高,PBT熔体的剪切黏度呈现不同程度的下降趋势,且温度较高时剪切黏度下降幅度增大;PBT熔体剪切黏度的温度敏感性在高剪切下显著减弱,在高压下缓慢增强;PBT熔体剪切黏度随压力的增大呈指数增加,符合Barus方程;在相同温度、相同剪切速率下,随着压力的增加,PBT熔体剪切黏度逐渐增大;PBT熔体剪切黏度随着剪切速率的增加逐渐降低,表现出典型的“剪切变稀”假塑性流体现象。

    Abstract:

    The effects of temperature, pressure and shear rate on the rheological behavior of polybutylene terephthalate (PBT) melt under high pressure were studied by capillary rheometer and reverse pressure chamber assembly. The results show that with the increase of temperature, the shear viscosity of PBT melt shows a different degree of decline, and the shear viscosity decreases significantly at higher temperatures. The temperature sensitivity of shear viscosity of PBT melt decreases significantly under high shear and increases slowly under high pressure. The shear viscosity of PBT melt increases exponentially with the increase of pressure, which conforms to the Barus equation. At the same temperature and shear rate, the shear viscosity of PBT melt increases with the increase of pressure. The shear viscosity of PBT melt decreases gradually with the increase of shear rate, showing a typical "shear thinning" pseudo plastic fluid phenomenon.

    参考文献
    相似文献
    引证文献
引用本文

郭增革,甘丽华,姜兆辉,张 斌,贾 曌,程博闻,李 鑫.高压条件下聚对苯二甲酸丁二醇酯熔体的流变行为[J].高分子材料科学与工程,2019,35(12):88-92. Zengge Guo, Lihua Gan, Zhaohui Jiang, Bin Zhang, Zhao Jia, Bowen Cheng, Xin Li. Rheological Behavior of Polybutylene Terephthalate Melt Under High Pressure[J]. Polymer Materials Science & Engineering,2019,35(12):88-92.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-01-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司