变模温与型腔气体反压辅助微孔发泡注塑技术及其产品内外泡孔结构演变
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省优秀创新团队自主项目(2012-136);中国博士后科学基金面上项目(2018M632671);材料成形与模具技术国家重点实验室开放课题研究基金项目(P2018-002)


Dynamic Mold Temperature Control and Cavity Gas Counter Pressure Assisted Microcellular Injection Molding and Evolution of Inner and Outer Cell Structure of the Molded Parts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立了一种变模温和型腔气体反压协同控制的微孔发泡注塑技术,研制了相应的变模温控制系统与型腔气体反压控制系统,构建了变模温与型腔气体反压辅助微孔发泡注塑试验线,并对变模温与型腔气体反压作用下的产品内外泡孔结构演变进行了研究。结果表明,变模温与型腔气体反压辅助工艺单独施加于微孔发泡注塑技术时,对其产品内外泡孔结构均具有双重影响:变模温可以改善产品大部分的表面形貌,但其对填充过程中的熔体发泡影响不大;型腔气体反压可以基本抑制填充过程中的熔体发泡,但却对产品内部泡孔密度有比较明显的降低影响。通过变模温与型腔气体反压的协同控制,可以实现微孔发泡注塑产品表面气泡形貌和内部泡孔结构的良好调控。

    Abstract:

    A kind of dynamic mold temperature control and cavity gas counter pressure assisted microcellular injection molding technique was established. The corresponding dynamic mold temperature control system and cavity gas counter pressure control system were developed, the dynamic mold temperature control and cavity gas counter pressure assisted microcellular injection molding test line were constructed, and the evolution of inner and outer cell structure of the molded parts were studied. The results show that when the dynamic mold temperature control or cavity gas counter pressure is applied to microcellular injection molding separately, it has double effects on the inner and outer cell structure of the molded parts: the dynamic mold temperature control can improve the most surface appearance of the molded parts, but has little effect on the melt foaming during filling stage; the cavity gas counter pressure can basically inhibit the melt foaming during filling stage, but has a significant effect on reducing the cell density of molded parts. Through coordinated controlling of dynamic mold temperature and cavity gas counter pressure, the inner and outer cell structure of the microcellular injection molded parts can be well regulated.

    参考文献
    相似文献
    引证文献
引用本文

董桂伟,赵国群,李 帅,王桂龙,张 磊,侯俊吉.变模温与型腔气体反压辅助微孔发泡注塑技术及其产品内外泡孔结构演变[J].高分子材料科学与工程,2020,36(1):89-98. Guiwei Dong, Guoqun Zhao, Shuai Li, Guilong Wang, Lei Zhang, Junji Hou. Dynamic Mold Temperature Control and Cavity Gas Counter Pressure Assisted Microcellular Injection Molding and Evolution of Inner and Outer Cell Structure of the Molded Parts[J]. Polymer Materials Science & Engineering,2020,36(1):89-98.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-02-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司