Abstract:The waterborne polyurethane was prepared from isophorone diisocyanate (IPDI), polytetrahydrofuran (PTMG), and 2,4-dihydroxybenzaldehyde (DBA), and the prepared waterborne polyurethane was used as crosslinking agent. A wood adhesive was prepared by Schiff base reaction between the aldehyde groups on the waterborne polyurethane molecular chains and the amino groups of industrial gelatin (INGE) extracted from waste leather. UV-vis, 1H-NMR and FT-IR show that DBA-WPU was successfully synthesized by reacting hydroxyl groups of the DBA molecular chains with isocyanate groups of the polyurethane prepolymer. The performance testing and structural characterization of INGE/DBA-WPU adhesives were tested by FT-IR, XRD, contact angle, TGA and wet shear strength. The results show that the crosslinking reaction between the DBA-WPU and INGE can increase the contact angle and thermal stability of the adhesives. The application test results show that the wet shear strength of the adhesives reaches 1.1 MPa when the amount of polyurethane is 30%, which meets the requirements of GB/T 9846.3-2004 (≥0.7 MPa), indicating the introduction of DBA-WPU can improve the water resistance of INGE wood adhesives.