Abstract:The modified nano-aluminium oxide (Al2O3) with various particle sizes was used as filler of hydrogenated nitrile rubber (HNBR), which is commonly used for single screw pump stator. The effects of the modified Al2O3 with different particle sizes on the cross-linking density, resistance to crude oil swelling of rubber materials, and friction and wear properties were studied. In addition, the reinforcement mechanism of Al2O3 with different particle sizes was analyzed. The results show that the cross-linking density and swelling resistance of HNBR filled with Al2O3 are improved, and the cross-linking density and performance of crude oil swelling resistance increase with the decrease of Al2O3 particle size. The friction and wear test results show that after Al2O3 with different particle sizes was filled into HNBR, the friction coefficient of and volume wear rate of the HNBR/ Al2O3 composites decrease, and then decrease with the decrease of particle sizes of filled Al2O3. The HNBR/Al2O3 composite filled with 10 nm Al2O3 has the good wear resistance. The mechanism of Al2O3 reinforcing HNBR is due to that crosslinked networks with Al2O3 as cross-linking point are formed, and that the network structure similar to interpenetrating polymer is formed owing to the macromolecular chains formed by the self-polymerization of the unsaturated groups on the surface of Al2O3 and the HNBR molecular chains interpenetrated.