聚乙烯醇增强p(AA-co-CTS)规整吸附介质的制备及对Sb(Ⅴ)的吸附性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省高校杰出青年科研人才培育计划(JYTJQ20170605);福建省中青年教师教育科研重点项目(JAT160836);泉州市高层次人才创新创业项目(2017G049)


Preparation of Polyvinyl Alcohol Enhanced p(AA-co-CTS) Structured Adsorption Medium and Its Adsorption Properties for Sb(Ⅴ)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以复配过硫酸钾-抗坏血酸为氧化还原引发剂,丙烯酸(AA)、壳聚糖(CTS)为功能性单体,以聚乙烯醇(PVA)为互穿线型高分子,利用溶剂结晶成孔技术和低温引发聚合制备了具有高强度、规整型吸附介质PVA-p(AA-co-CTS),探究了其对Sb(Ⅴ)的吸附性能。聚合体系最佳配方:AA与CTS总质量分数为7%,其中CTS与AA的质量比为0.18~0.2,PVA的质量分数为1.5%~2.0%,PVA-p(AA-co-CTS)介质整体成型于反应器中,孔隙连续,孔径范围为100~800 μm,湿样抗压缩强度为0.48 MPa;孔隙内表面富含的-OH、-NH2及-COOH基团对Sb(Ⅴ)有强吸附能力。最佳吸附工艺为流量6 mL/min,温度293.15 K,初始浓度200 mg/L,最大吸附量76.77 mg/g。当操作温度在293.15 K时,Thomas拟合方程R2=0.9995,KTh=1.7595 mL/(mg·min)。富含功能基团规整型吸附介质通过低温结晶聚合一步成功制备,可取代传统散装吸附树脂、离子交换树脂用于Sb(Ⅴ)的吸附分离。

    Abstract:

    Using compound potassium persulfate-ascorbic acid as redox initiator, acrylic acid (AA) and chitosan (CTS) as functional monomer, polyvinyl alcohol (PVA) as interpenetrating network to enhance the strength of medium, solvent crystallization pore-forming technology and low-temperature oxidation-reduction initiation polymerization were used to prepare high strength and structured porous adsorptive medium PVA-p (AA-co-CTS), of which adsorption properties for Sb (Ⅴ) were studied. The optimum polymerization system as follows: total mass fraction of AA and CTS is 7%, the mass ratio of CTS to AA is 0.18~0.2, and the mass fraction of PVA is 1.5%~2.0%. The pore structure of the prepared PVA-p(AA-co-CTS) was structured and continuous, of which the scale is 100~800 μm, and the maximum compressive strength of wet samples is 0.48 MPa. The PVA-p (AA-co-CTS) adsorption medium porous inner surface is rich in -OH, -NH2 and -COOH groups have a strong adsorption capacity with Sb(Ⅴ) . The optimum adsorption conditions are as follows: adsorption liquid flow rate 6 mL/min, temperature 293.15 K, initial concentration 200 mg/L, the maximum adsorption capacity 76.77 mg/g. When the operating temperature is 293.15 K, Thomas fit function R2=0.9995, KTh=1.7595(mL/(mg·min)). Structured adsorptive materials rich in functional groups were successfully prepared by one-step cryogenic crystallization polymerization. It can replace traditional bulk adsorptive resins and ion exchange resins for the adsorption and separation of Sb(Ⅴ).

    参考文献
    相似文献
    引证文献
引用本文

李大刚,陈晓玲,陈崇城,李云龙,林松柏.聚乙烯醇增强p(AA-co-CTS)规整吸附介质的制备及对Sb(Ⅴ)的吸附性能[J].高分子材料科学与工程,2020,36(2):161-168. Dagang Li, Xiaoling Chen, Chongcheng Chen, Yunlong Li, Songbai Lin. Preparation of Polyvinyl Alcohol Enhanced p(AA-co-CTS) Structured Adsorption Medium and Its Adsorption Properties for Sb(Ⅴ)[J]. Polymer Materials Science & Engineering,2020,36(2):161-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-04-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司