Abstract:Taking 1,5-cyclooctadiene as starting material, the functional monomer (cyclooct-4-en-1-yl-2-bromopropanoate, M1) was prepared through a series of chemical reactions, including the selective epoxidation reaction of 1,5-cyclooctadiene, the reduction reaction of cyclooctadiene monoepoxide and the esterification reaction between cyclooct-4-enol and 2-bromopropiomyl bromide. The ring-opening metathesis polymerization of M1 with Grubbs 2nd generation catalyst (G2) produced homopolymers (P1). The molecular weight of resulted polymers increases gradually and the molecular weight distribution becomes broader as the increase in the monomer concentration. In addition, a series of random copolymers of M1 and cyclooctene (P5%, P10%, P15% and P20%) were also prepared by adjusting the feeding ratio of M1 (5%, 10%, 15% and 20%). The structure of resulting (co)polymers was characterized by FT-IR, 1H and 13C-NMR spectra. The results indicate that the incorporation contents of M1 in the random copolymers are close to the theoretical value in the feeding and the molecular weight distributions of copolymers are narrower than those of homopolymers. The DSC analysis shows that the melting points of copolymers decrease gradually as the increase in the contents of functional monomer in the copolymers, which can be ascribed to the increase in the numbers of side chains in the random copolymers. The chemical hydrogenation of unsaturated polymers by using p-toluenesulfonyl hydrazide/tri-n-propylamine yielded the corresponding saturated polymers, which could be considered as side-chain-functionalized polyolefins. In other words, the hydrogenated polymers (HP1) are the equivalents of ethylene/bromo propionic acid vinyl ester copolymers with 25% of functional monomer. From DSC curves, the saturated polymers (HP1) have a much high glass transition temperature than the corresponding unsaturated polymers (P1). The TGA results show that the saturated HP1 has better thermal stability than the unsaturated P1.