Abstract:Simultaneously endowing poly(lactic acid) (PLA) with flame retardancy and toughness still is a challenge. Focus on this issue, an intumescent flame retardant composed of calcium phytate (PA·Ca) and ammonium polyphosphate (APP) is added into PLA which is toughen by biobased unsaturated polyester via dynamic vulcanization (TPLA). The effect of mass ratio of PA·Ca and APP on the properties of TPLA were investigated. Thermogravimetric results show that the introduction of flame retardants does not destroy the thermal stability of PLA materials, on the contrary, the residue is enhanced greatly. After adding 10% APP and 5% PA·Ca, the TPLA can pass UL-94 V-0 level, and its LOI value is 27%. Besides, cone calorimeter results show the peak heat release rate and total heat release of modified TPLA are decreased 57.5% and 69.5%, respectively. It is worth mentioned that the toughness of modified TPLA is improved greatly, in which its elongation at break and notched impact strength are 7.6 and 6.5 times respectively as those of neat PLA.