Abstract:Using eucalyptus pulp as raw material, a composite enzyme composed of cellulase and xylanase (enzyme concentration ratio of 9∶1) with the total enzyme concentration of 10 U/mL was used to prepare nanocrystalline cellulose (NCC). The NCCs with the average length of 625 nm and diameter of 50 nm were obtained under the composite enzymatic hydrolysis for 12 h at 50 ℃. Subsequently, the transparent NCC film was obtained by the vacuum filtration method using the prepared NCC as raw material. The obtained performance indexes of the NCC film were as follows: the elastic modulus is 8178 MPa, tensile stress is 33 MPa,the transmittance is 90.86%, and the strain at break is 99%, indicating that the NCC film has good mechanical properties and transmittance. Furthermore, the NCC was mixed with the gas-sensing nano-titanium dioxide (TiO2) colloid, and the TiO2/NCC composite film was obtained by the vacuum filtration method. The study results show that the TiO2/NCC composite films with the small addition of TiO2 (TiO2 content of 1%, 2% and 4%) still have good transmittance (greater than 90%) and physical properties (elastic modulus of 4906 MPa, tensile strength of 37 MPa, elongation at break of 45%). Moreover, the TiO2/NCC composite film has a gas-sensitive response to ammonia gas at room temperature, as well as good selectivity and stability. These results lay a solid foundation for the future research on wearable gas sensors based on developed TiO2/NCC composite films.