Abstract:By ultrasonic reaction technique, diisocyanate modified graphene oxide NCO@GO were prepared by the reaction of NCO groups of toluene diisocyanate with hydroxyl from GO. The aqueous GO covalent hybrid polyurethane resin was prepared by in situ step polymerization. Polyurethane (PU) electrodeposition coatings were prepared by mixing GO hybrid waterborne polyurethane with the crosslinking agent. The characteristic functional groups of GO before and after modification and the GO/PU electrodeposition resin were analyzed by FT-IR. The thermal stability of the GO/PU electrodeposition resin was determined by TG. The interlamellar effect of GO in the GO/PU electrodeposition resin was examined by XRD. The morphology of the GO/PU electrodeposition resin was characterized by TEM. The conductivity of paint films was measured by conductivity meter. The influence of GO contents on the appearance and properties of polyurethane films was studied. The results show that with the increase of GO content, the conductivity, gloss, hardness and acid resistance of waterborne polyurethane paint films increase first and then decrease. When the mass fraction of GO is 0.75%, GO shows the better dispersion stability in waterborne polyurethane resin, the conductivity, gloss, hardness and acid resistance of the paint film are the best.