加热非燃烧卷烟降温材料用聚乳酸及其复合物的性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31460247,81460542,81760644);云南省重大科技专项-生物医药重大专项(2018ZF008);云南民族大学生物基功能材料研究与应用科技省创新团队(2017HC034)


Properties of Polylactic Acid and Its Composites for Heating Non-Combustion Cigarette Cooling Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    高强度聚乳酸和熔融共混的无机纳米粒子氮化硼(BN)/聚乳酸(PLA)复合物通过溶剂流延法制备成薄膜材料,并与现有新型卷烟降温段材料进行对比。X射线衍射结果表明,BN粒子添加后结晶度提升4%~11%;热重分析、差示扫描量热分析的结果显示,复合材料的熔融温度提升16~18 ℃,热分解温度提升1~20 ℃;从力学性能测试与动态力学热分析的结果中得出,复合材料的力学性能显著提升,韧性增大130%;降温测试结果显示,复合材料的降温性能提升1%~30%。当BN添加量为2%时,复合材料作为新型卷烟降温材料的综合性能最佳。

    Abstract:

    The high-strength polylactic acid and melt-blended inorganic nanoparticle boron nitride (BN)/polylactic acid (PLA) composite films were prepared by solvent casting method, and compared with the existing cigarette cooling section material. X-ray diffraction (XRD) results show that the crystallinity of BN particles is increased by 4%~11%; the results of thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis show that the melting temperature of the composite is increased by 16~18 ℃, and the thermal decomposition temperature is increased by 1~20 ℃; from the results of dynamic thermomechanical analysis (DMA), mechanical properties of the composites are significantly increased, the toughness is increased by 130%; the cooling test results show that the cooling performance of the composites is significantly improved by 1%~30%. When the mass fraction of BN added is 2%, the overall performance of the composite, as new type of cigarette cooling material, is the best.

    参考文献
    相似文献
    引证文献
引用本文

王东岳,雷 萍,杨仁裕,何 毅,袁明龙,李宏利.加热非燃烧卷烟降温材料用聚乳酸及其复合物的性能[J].高分子材料科学与工程,2020,36(4):21-28. Dongyue Wang, Ping Lei, Renyu Yang, Yi He, Minglong Yuan, Hongli Li. Properties of Polylactic Acid and Its Composites for Heating Non-Combustion Cigarette Cooling Materials[J]. Polymer Materials Science & Engineering,2020,36(4):21-28.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-06-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司