耐水阻燃苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物/聚丙烯材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51673035)


Preparation and Properties of Water-Resistant Flame Retardant Thermoplastic Elastomer Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以充油的苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(O-SEBS)和聚丙烯(PP)按质量比2∶1混合后制备热塑性弹性体(TPE)材料。将耐水性能优异的焦磷酸二三聚氰胺(DMPy)和二乙基次膦酸铝(AlPi)添加到TPE材料中,对其阻燃、耐水等性能进行了研究。当DMPy/AlPi的质量比为1∶1、总添加量为38%时,TPE/DMPy/AlPi材料在垂直燃烧测试中达到了UL-94 V-0级,氧指数为27.2%。材料在封闭的70 ℃水浴环境中放置168 h后依然能通过UL-94 V-0级,失重率仅为0.76%,表明材料具有优异的耐水性能。锥形量热测试表明,耐水测试后,材料的阻燃性能略有提升。

    Abstract:

    In this paper, the oil-filled styrene-ethylene-butylene-styrene block copolymer (O-SEBS) was blended with polypropylene (PP) at the mass ratio of 2∶1 and the thermoplastic elastomer material (TPE) was obtained. The dimethyl melamine pyrophosphate (DMPy) and aluminum diethylphosphinate (AlPi) with excellent water resistance were incorporated into TPE materials, and the fire resistance and water resistance of composites were investigated. The TPE/DMPy/AlPi composites achieve UL-94 V-0 rating during vertical burning test and the limited oxygen index is 27.2% when the total loading amount of DMPy/AlPi is 38% at the mass ratio of 1∶1. The samples still fulfill UL-94 V-0 rating after the water resistance test for 168 h, and the mass loss percentage is only 0.76 %. It is indicated that the prepared flame retardant TPE composites present superior water resistance. Besides, the results of cone calorimeter test reveal that the fire resistance of the TPE composites is slightly improved after water resistance test.

    参考文献
    相似文献
    引证文献
引用本文

陶莉丽,朱平波,李 斌,许苗军.耐水阻燃苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物/聚丙烯材料的制备及性能[J].高分子材料科学与工程,2020,36(4):29-34. Lili Tao, Pingbo Zhu, Bin Li, Miaojun Xu. Preparation and Properties of Water-Resistant Flame Retardant Thermoplastic Elastomer Materials[J]. Polymer Materials Science & Engineering,2020,36(4):29-34.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-06-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司