成核剂调控的具有不同泡孔结构聚乙烯泡沫的尺寸稳定性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2016YFB0302200)


Dimension Stability of Polyethylene Foams with Different Cell Structures Manipulated by Nucleating Agents
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了几种纳米颗粒调控的聚乙烯(PE)泡沫的尺寸稳定性,通过差示扫描量热仪、扫描电镜考察了几种纳米颗粒对PE结晶行为和发泡形貌的影响。结果表明,纳米颗粒作为结晶成核剂可以提高PE的结晶温度,同时作为发泡成核剂还可以使PE泡沫的泡孔密度增大,且其形状和表面化学性质会影响成核效果,进而影响最终的发泡形貌。进一步研究还发现,不同泡孔结构的PE泡沫的尺寸稳定性存在差异,未添加成核剂的PE泡沫收缩最严重,而添加成核剂后PE泡沫的泡孔尺寸减小,尺寸稳定性得到提高。通过建立立方体泡孔结构模型模拟计算了泡孔孔径对尺寸稳定性的影响,计算结果与实验数据较为吻合,结果表明,泡孔尺寸越小,PE泡沫的尺寸稳定性越好。

    Abstract:

    This work aimed at studying the dimensional stability of low density polyethylene (LDPE) foams with different cell structures manipulated by different nanoparticles. The effects of several nanoparticles on the crystallization behavior and foaming morphology of LDPE were investigated by DSC and SEM. It is shown that the crystallization temperature of LDPE can be slightly increased by nanoparticles. The nanoparticles can also provide multiple nucleation sites in the LDPE foaming process, thus increasing the cell density of LDPE foams. The shape and surface chemistry of nanoparticles can affect the nucleation efficiency, and therefore, the final foaming morphology. The dimensional stability of PE foams with different foaming morphology was investigated. The shrinkage of LDPE foams without nucleating agent was the most obvious, while the dimensional stability of PE foams with reduced cell size is improved significantly by adding nucleating agents. A simple mathematical model with cubic cell structure was set up to investigate the influence of cell diameter on the dimensional stability of LDPE foams. Both of the modeling results and the experimental data agree well with each other, showing that the dimension stability of PE foams is increased with decreasing cell size.

    参考文献
    相似文献
    引证文献
引用本文

方志颖,张 洪,许志美,曹志怀,金 耿,刘 涛.成核剂调控的具有不同泡孔结构聚乙烯泡沫的尺寸稳定性[J].高分子材料科学与工程,2020,36(4):35-41. Zhiying Fang, Hong Zhang, Zhimei Xu, Zhihuai Cao, Geng Jin, Tao Liu. Dimension Stability of Polyethylene Foams with Different Cell Structures Manipulated by Nucleating Agents[J]. Polymer Materials Science & Engineering,2020,36(4):35-41.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-06-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司