Abstract:In order to study the efficiency of alumina with different morphologies in obtaining 3-D thermally conductive networks in silicon rubber (LSR) matrix, the influence of preparation conditions on the morphologies of alumina was studied. Rod-shaped alumina (AF-2 and AF-5) with a length of about 6 μm, diameters of 0.2 μm and 1 μm, respectively, and spherical alumina (AF-6) with a diameter of 1~10 μm were obtained by changing the hydrothermal reaction conditions. The Hashin-Shtrikman model was used to characterize the efficiency of aluminum oxide fillers in the construction of 3-D network in the silicone rubber matrix. The results show that the interaction rates, Χinter, for AF-2, AF-5 and AF-6 at a loading level of 20% are 0.056, 0.093 and 0.034, respectively. At the same time, the thermal properties and dielectric properties of these alumina/LSR composites were studied. The results show that AF-5 causes the least changes in the dielectric properties of silicone, and the AF-5/LSR composite displays the lowest dielectric constant and dielectric loss, which is benefit to applications of the composites in the electronic industry.