聚对苯二甲酰癸二胺的固相聚合反应过程
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2017YFB0307600);河南省重大科技专项(181100211200)


Solid State Polymerization Process of Poly( decamethylene terephthalamide)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用差示扫描量热分析、热失重分析和变温红外光谱等表征手段对聚对苯二甲酰癸二胺(PA10T)盐的固相聚合过程进行了系统研究。研究结果表明,在PA10T盐固相聚合过程中,反应温度起着至关重要的作用,230 ℃以下固相聚合反应很难发生;在240 ℃反应2 h或250 ℃反应1 h后,PA10T盐可以完全转化为聚合物。通过分析可知,反应过程主要分为2个阶段:第1阶段,部分PA10T盐分解并释放出癸二胺;第2阶段,PA10T盐发生缩聚反应并释放出水分子。

    Abstract:

    The solid state polymerization of poly(decamethylene terephthalamide)(PA10T) salt was systematically studied by differential scanning calorimetry(DSC), thermogravimetric analysis(TG) and variable temperature FT-IR spectroscopy. The results show that the reaction temperature plays a crucial role in the solid state polymerization of PA10T salt. The solid state polymerization below 230 ℃ is difficult to occur. After reacting at 240 ℃ for 2 h or at 250 ℃ for 1 h, PA10T salt can be completely converted into polymer. The whole reaction process is mainly divided into two stages: at the first stage, partial PA10T salt decomposes and releases decanediamine; at the second stage, PA10T salt undergoes a polycondensation reaction and releases water molecules.

    参考文献
    相似文献
    引证文献
引用本文

邹海龙,冯 绪,付 鹏,崔 吉吉,张晓朦,赵清香,刘民英.聚对苯二甲酰癸二胺的固相聚合反应过程[J].高分子材料科学与工程,2020,36(5):1-5. Hailong Zou, Xu Feng, Peng Fu, Zhe Cui, Xiaomeng Zhang, Qingxiang Zhao, Minying Liu. Solid State Polymerization Process of Poly( decamethylene terephthalamide)[J]. Polymer Materials Science & Engineering,2020,36(5):1-5.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司