表面功能化碳纳米管改性水性聚氨酯复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽省2017年度科技计划重点项目(1704a0902018);安徽省高校自然科学研究重点项目(KJ2016A792);安徽省自然科学基金资助项目(11040606M59)


Preparation and Properties of Surface Functionalized Carbon Nanotube Modified Waterborne Polyurethane Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚酯多元醇(PCDL)、异佛尔酮二异氰酸酯(IPDI)、二羟甲基丁酸(DMBA)、1,4-丁二醇(BDO)、双季戊四醇(Di-PE)为原料,合成-NCO封端的水性聚氨酯预聚体(WPU);再以多巴胺(DOA)和γ-氨丙基三乙氧基硅烷(APTES)协同修饰碳纳米管(CNTs),得到 A-DOA/CNTs,并与WPU进行共价连接、交联,制备了A-DOA/CNTs/WPU复合材料。通过红外光谱、X射线光电子能谱、透射电镜、扫描电镜、热重分析和拉伸性能等对材料结构和性能进行表征,探究了A-DOA/CNTs的用量对胶膜耐水性、热性能、断面形貌及力学性能的影响。结果表明,当A-DOA/CNTs质量分数为0.75%时,能均匀分散在聚氨酯基体中,此时胶膜的综合性能最佳,水接触角为92.6°,吸水率5.7%,拉伸强度为29.6 MPa,断裂伸长率为225%,质量损失T10%时的热分解温度为267 ℃,与纯聚氨酯相比热分解温度提高了28 ℃ ,其耐热性、耐水性、力学性能均有显著提高。

    Abstract:

    The NCO-terminated waterborne polyurethane (WPU) prepolymer was synthesized from polyester polyol (PCDL), isophorone diisocyanate (IPDI), dihydroxymethyl butyric acid (DMBA), 1,4-butanediol (BDO) and pentaerythritol (Di-PE) as raw material, and then carbon nanotubes (CNTs) were synergistically modified with dopamine (DOA) and gamma-aminopropyl triethoxysilane (APTES) to obtain A-DOA/CNTs, A-DOA/CNTs/WPU composite materials were prepared by covalent connection and crosslinking with WPU. The structure and properties of the obtained polymers were characterized by FT-IR, XPS ,TEM, SEM, TG and tensile properties measurement. Moreover, the effects of different amounts of CNTs on the water resistance, thermal properties, cross-section morphology and mechanical properties of the films were investigated. The results show that when the A-DOA/CNTs content is 0.75%, the modified CNTs could be dispersed evenly in polyurethane films. At this time, the comprehensive properties of the film are the best: the water contact angle is 92.6°, the water absorption rate is 5.7%, the tensile strength is 29.6 MPa, and the elongation at break is 225%, the decomposition temperature at 10% mass loss is 267 ℃, increased by 28 ℃ compared with that of pure WPU, water resistance and heat resistance and mechanical properties are improved significantly compared with those of unmodified PU film.

    参考文献
    相似文献
    引证文献
引用本文

陈 静,杨建军,吴庆云,张建安,吴明元,刘久逸.表面功能化碳纳米管改性水性聚氨酯复合材料的制备与性能[J].高分子材料科学与工程,2020,36(5):64-70. Jing Chen, Jianjun Yang, Qingyun Wu, Jian’an Zhang, Mingyuan Wu, Jiuyi Liu. Preparation and Properties of Surface Functionalized Carbon Nanotube Modified Waterborne Polyurethane Composites[J]. Polymer Materials Science & Engineering,2020,36(5):64-70.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司