固态环氧树脂的流变与发泡性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省技术创新专项(2018AAA008)


Rheological and Foaming Properties of Solid-State Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以固态环氧树脂为基体,采用“两步升温”通过化学发泡法制备了固态环氧树脂发泡材料,通过旋转流变仪和扫描电子显微镜对环氧树脂的流变性能和发泡性能以及泡孔结构进行了分析。结果表明,固化剂双氰胺含量为14%时,固化反应效率最大,“两步法”能有效改善环氧树脂的发泡性能,得到平均泡孔尺寸最小(272.3 μm)、泡孔密度最大(0.69×102cm-3)的发泡材料,并且能在一定程度上克服固态环氧树脂的加工难度,实现其高效应用。

    Abstract:

    The solid epoxy resin foaming materials were prepared by two-step process and chemical foaming method using solid epoxy resin as matrix. Rheological properties, foaming properties and the cell structure of the solid epoxy resin were analyzed by rotary rheometer and SEM. The results show that the curing reaction efficiency is the highest when the dicyandiamide has a content of 14%. The "two-step method" can effectively improve the foaming performance of the epoxy resin, the obtained foaming material has the smallest average cell size of 272.3 μm and the maximum cell density of 0.69×102cm-3. The "two-step method" can overcome the processing difficulty of solid epoxy resin to a certain extent, to achieve efficient application.

    参考文献
    相似文献
    引证文献
引用本文

刘 颖,张 荣,刘清亭,付旭东,胡圣飞.固态环氧树脂的流变与发泡性能[J].高分子材料科学与工程,2020,36(5):79-85. Ying Liu, Rong Zhang, Qingting Liu, Xudong Fu, Shengfei Hu. Rheological and Foaming Properties of Solid-State Epoxy Resin[J]. Polymer Materials Science & Engineering,2020,36(5):79-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司