环磷腈型多官能度环氧树脂的合成及固化动力学
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Curing Kinetics of Cyclotriphosphazene-Based Multifunctional Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以六氯环三磷腈(HCCP)为原料合成了一种六官能度环氧树脂——六(4-缩水甘油氧基甲基苯氧基)环三磷腈(HGPCP),采用红外光谱、核磁共振氢谱和磷谱对其进行了结构表征和确认。选择4,4'-二氨基二苯甲烷(DDM)和4,4'-二氨基二苯砜(DDS)作为固化剂,采用非等温差示扫描量热法对HGPCP的热固化动力学进行了研究。研究表明,HGPCP/DDM和HGPCP/DDS固化体系的表观活化能分别为52.46 kJ/mol和61.77 kJ/mol,相比于通过Kissinger法、Crane法建立的n级动力学模型,DDM和DDS对HGPCP的固化反应更符合esták-Berggren双参数自催化模型。此外,结合不同升温速率的特征温度,对DDM、DDS固化HGPCP的工艺条件进行了优化。

    Abstract:

    A novel hexa-functional epoxy resin hexa-[4-(glycidyloxymethyl)phenoxy]-cyclotriphosphazene, HGPCP, was synthesized from hexachlorocyclotriphosphazene (HCCP) in four steps, the chemical structure of HGPCP was characterized by FT-IR, 1H, and 13P-NMR spectroscopy. 4,4-Diaminodiphenyl methane (DDM), 4,4‘-diaminodiphenyl sulfone (DDS) were selected as curing agents, the thermal curing kinetics of HGPCP was studied by non-isothermal differential scanning calorimetry (DSC). The results show that the apparent activation energies of HGPCP/DDM and HGPCP/DDS are 52.46 kJ/mol, 61.77 kJ/mol, respectively. Comparing to n order model deduced from Kissinger and Crane method, the curing process of HGPCP/DDM and HGPCP/DDS can be well described by esták-Berggren two-parameter autocatalytic model. Furthermore, the curing condition of HGPCP cured by DDM, DDS was optimized according to the characteristic temperature at different heating rates.

    参考文献
    相似文献
    引证文献
引用本文

周立生,张广成,杨士山,杨立波,曹继平,杨科武.环磷腈型多官能度环氧树脂的合成及固化动力学[J].高分子材料科学与工程,2020,36(5):107-116. Lisheng Zhou, Guangcheng Zhang, Shishan Yang, Libo Yang, Jiping Cao, Kewu Yang. Synthesis and Curing Kinetics of Cyclotriphosphazene-Based Multifunctional Epoxy Resin[J]. Polymer Materials Science & Engineering,2020,36(5):107-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司