采用Barbier缩聚反应制备自修复材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项课题(05Z12100010)


Preparation of Self-Healing Material by Barbier Polycondensation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过呋喃甲酸甲酯和1, 10-二溴癸烷的Barbier缩聚反应制得预聚物,凝胶渗透色谱测试结果表明制备的预聚物数均相对分子质量为9700,相对分子质量分布指数为1.23。将该预聚物与N,N'-(4,4'-亚甲基二苯基)双马来酰亚胺(BMI)反应制备了一种基于热可逆Diels-Alder键的自修复薄膜。通过显微镜观察自修复薄膜的裂纹修复效果,该薄膜可以在65 ℃,1 min内完成对裂纹的修复,具有优良的自修复性能。热重测试表明,自修复薄膜具有良好的热稳定性,当将薄膜材料加热到280 ℃时,自修复薄膜的质量仅减少5%。

    Abstract:

    A prepolymer was prepared by Barbier polycondensation with methyl furanformate and 1,10-dibromodecane as monomer. The results from gel permeation chromatography illustrate that the number average molecular weight of prepolymers is 9700, and the molecular weight distribution of the polymer compound is 1.23. A self-healing film based on thermally reversible D-A bond was prepared by reacting the prepolymer with N,N′-(4,4′ -methylene diphenyl) bismaleimide(BMI). The self-healing effect of thin film was observed by microscope, and it is shown the film has excellent self-healing properties, the self-healing film can repair microcracks within 1 min at 65 ℃. Thermogravimetric test results indicate that the self-healing film has an excellent thermal stability. When the self-healing film is heated to 280 ℃, its mass loss is only 5%.

    参考文献
    相似文献
    引证文献
引用本文

张晓云,田 娣,叶 帆,李广军,孙海翔,温福山.采用Barbier缩聚反应制备自修复材料[J].高分子材料科学与工程,2020,36(5):117-120. Xiaoyun Zhang, Di Tian, Fan Ye, Guangjun Li, Haixiang Sun, Fushan Wen. Preparation of Self-Healing Material by Barbier Polycondensation[J]. Polymer Materials Science & Engineering,2020,36(5):117-120.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司