高熔体流动性聚芳酯的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省重点研发计划(BE2019008-4)


Synthesis and Properties of High Melt Flowability Polyarylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过相转移界面缩聚的方法,将4, 4’-二乙基-1, 1’-二苯基苯酚(BHPP)和2, 2-双(4-羟基苯基)丙烷(BPA)、对苯二甲酰氯(TPC)以及间苯二甲酰氯(IPC)进行共聚,合成了一系列不同酰氯比例的含乙基侧基的聚芳酯(PABAs)。利用核磁共振和傅里叶变换红外光谱对BHPP单体及PABA系列聚芳酯的结构进行了表征。差示扫描量热法和热重分析结果表明,聚合物具有良好的热性能,其玻璃化转变温度(Tg)为183.7~209.9 ℃,初始分解温度高于436 ℃。拉伸测试结果表明聚合物薄膜的拉伸强度大于60 MPa,力学性能优异。同时通过流变测试表明所得聚芳酯具有优良的熔体流动性,乙基侧基的引入使其熔融加工性能得到较大提升。

    Abstract:

    4, 4’- Diethyl-1, 1’ - diphenylphenol (BHPP) was introduced into the main chain, and it was conducted to copolymerize with 2, 2-bis (4-hydroxyphenyl) propane (BPA), terephthaloyl chloride (TPC) and isophthalic chloride (IPC) through the phase transfer interfacial polycondensation to synthesize a series of new polyarylates (PABAs) with varied ratios of acyl chloride. The structure and properties of the resultant copolymers were tested by 1H-NMR, FT-IR, DSC and so on. The results show that the glass transition temperature (Tg) of the copolymers is in the range of 183.7~209.9 ℃, and the initial decomposition temperature is higher than 436 ℃. The rheological property test shows that the introduction of ethyl side groups could effectively reduce the complex viscosity and largely improve the melt flowability of the traditional polyarylates.

    参考文献
    相似文献
    引证文献
引用本文

张 雨,严光明,张 刚,杨 杰.高熔体流动性聚芳酯的合成及性能[J].高分子材料科学与工程,2020,36(5):161-166. Yu Zhang, Guangming Yan, Gang Zhang, Jie Yang. Synthesis and Properties of High Melt Flowability Polyarylate[J]. Polymer Materials Science & Engineering,2020,36(5):161-166.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-07-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司