Abstract:Poly(ε-caprolactone) /poly (L-lactide) (PCL/PLLA) heterogeneous blend films with different PLLA blend composition ratios were prepared by melt blending. Based on the compatibility and phase structure of the blends, the mechanical properties, gas and water vapor barrier properties of the blends were studied, meanwhile, the relationship between the microphase separation structure and packaging properties of the blends was discussed. The results show that PCL/PLLA blend membranes with different PLLA blending ratios formed heterogeneous systems with different phase separation structures. When the PLLA blending ratio is higher than 50%, the phase separation structure and compatibility of the blend film system are improved, the tensile strength and elastic modulus of the blend film increase greatly accordingly, while maintaining a high elongation at break, nevertheless gas and water vapor permeability decrease significantly. Compared with the pure PCL, the tensile strength and elastic modulus of PCL/PLLA(75) blend films is 68.1 MPa and 1136.4 MPa, which are increased by 166% and 289% respectively; the CO2 permeability and O2 permeability of PCL/PLLA(75) blend films are decreased by 70% and 87% respectively at 5 ℃; and the water vapor permeability of it is decreased by 31% at room temperature.