熔纺三叶形聚乙烯醇纤维的制备及增强水泥基材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51721091);高分子材料工程国家重点实验室自主课题(sklpme2018-3-01)


Preparation of Trilobal Poly(vinyl alcohol) Fiber and Its Reinforcement for Cement-based Composite Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用自主创新的聚乙烯醇(PVA)熔融纺丝新技术,首次制备了三叶形截面PVA异形纤维,为水泥基复合材料提供新型增强纤维。研究了熔融纺丝和热拉伸对纤维截面形状、热性能、结晶性能、取向度和力学性能等的影响。结果表明,熔纺三叶形截面PVA初生纤维内部结构均匀致密,无明显皮芯结构。经热拉伸处理,纤维能较好保持三叶形截面,异形度为58.2%。PVA分子链在拉伸应力下诱导结晶,纤维结晶结构更完善,结晶度和取向度增加,纤维的强度增加,熔点升高。热拉伸8倍后,纤维强度达3.7 cN/dtex。将三叶形纤维用于水泥基复合材料的增强增韧,当其体积掺量为2%时,纤维增强水泥试件的挠度达17.3%,断裂能达10.5 J。

    Abstract:

    This paper reported the novel trilobal poly(vinyl alcohol) (PVA) fibers prepared by melt spinning for reinforcing cement-based composite materials. The effects of melt spinning and hot drawing on the cross-section, thermal properties, crystallinity, orientation and mechanical properties of the fibers were studied. The results show that the internal structure of trilobal PVA as-spun fiber is homogeneous, without visible skin-core structure. Through hot drawing, the trilobal cross section of PVA fiber is well maintained with the degree of profile of 58.2%. The macromolecular regularity is improved during the hot drawing, leading to the increase of crystallinity, orientation, the strength as well as the melting point of fiber. When the hot drawing ratio is 8, the tensile strength of the PVA fibers reaches 3.7 cN/dtex. The prepared trilobal PVA fibers were used to strengthen and toughen cement-based composites. When the volume fraction of the trilobal PVA fiber is 2%, the deflection limit and the fracture energy of the reinforced cement-based material reach 17.3% and 10.5 J, respectively.

    参考文献
    相似文献
    引证文献
引用本文

王 萌,陈 宁.熔纺三叶形聚乙烯醇纤维的制备及增强水泥基材料[J].高分子材料科学与工程,2020,36(6):102-109. Meng Wang, Ning Chen. Preparation of Trilobal Poly(vinyl alcohol) Fiber and Its Reinforcement for Cement-based Composite Materials[J]. Polymer Materials Science & Engineering,2020,36(6):102-109.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-08-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司