Abstract:Sub micron-sized graphene oxide (GO) with narrow size distribution was prepared by ultrasonic method, and GO/polyethylene terephthalate (PET) composites were prepared by melt blending and injection molded. The results show that sub-micron-sized GO with narrow size distribution is successfully prepared by ultrasonic method, which is beneficial for dispersion in PET. The addition of sub-micron-sized GO does not change the crystal structure of the composites, however, can increase the crystallization temperature, crystallinity and heat distortion temperature of the composites, and the thermal stability of the composite does not change. Adding sub-micron-sized GO can effectively improve the mechanical properties of the composite materials. The mechanical properties increase first and then decrease with the increase of GO amount. When the GO content is 0.05%, the mechanical properties of the PET composite are optimal. The tensile strength, tensile modulus and flexural strength are increased by 28%, 15% and 22%, respectively, compared with those of pure PET. This method is simple to operate, and a lower amount of GO can achieve a better enhancement effect, does not require an organic solvent, and has a good mass production prospect.