缝合泡沫夹芯材料的冲击后压缩性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51763016,51875201);江西省研究生创新专项资金(YC2018-S065)


Compression Properties After Impact of Stitched Foam Sandwich Structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用VARTM制备技术制备缝合/未缝合泡沫夹芯材料,分别在4组不同冲击能量下进行冲击试验及冲击后压缩试验,利用超声c检测技术对冲击后纤维面板内部的不可见损伤进行探测,发现缝合树脂柱的加入可以有效提高复合结构的抗冲击性能,其中冲击最大载荷的提升幅度达到20%~50%,此时,通过超声c检测发现纤维面板内部已经发生了较多的基体开裂,但分层破坏及纤维断裂情况有明显的减少,另外冲击后剩余压缩强度的提高也达到了35%~40%,同时发现相较于15 mm×15 mm的缝合密度,10 mm×10 mm的缝合密度具有更好的抗冲击性能。

    Abstract:

    The stitched/unstitched foam core material was prepared by VARTM technology, and the impact test and the post-impact compression test were carried out under four different impact energies, respectively. The invisible damage inside the fiber panel was detected by ultrasonic c detection technology. The addition of the columns can effectively improve the impact resistance of the composite structure, wherein the maximum load impact is increased by 20%~50% because with the addition of column, more matrix cracking occurs inside, but the delamination damage and fiber breakage are reduced. And the residual compression strength after impact is also increased by 35%~40%. In addition, it is found that compared with a stitching density of 15 mm×15mm, a stitching density of 10 mm×10 mm has a better impact resistance.

    参考文献
    相似文献
    引证文献
引用本文

阮金琦,赖家美,王 森,黄志超.缝合泡沫夹芯材料的冲击后压缩性能[J].高分子材料科学与工程,2020,36(7):103-111. Jinqi Ruan, Jiamei Lai, Sen Wang, Zhichao Huang. Compression Properties After Impact of Stitched Foam Sandwich Structure[J]. Polymer Materials Science & Engineering,2020,36(7):103-111.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司