棉织物表面的超疏水功能改性整理与性能表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31600478);江苏省自然科学基金资助项目(BK20140145);中央高校基本科研业务费专项资金(重点项目 JUSRP51718A);江苏高校优势学科建设工程资助项目(苏政办发[2014]37)


Superhydrophobic Functional Modification and Characterization of Cotton Fabric Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用新的方法制备超疏水棉织物,突破了传统使用额外纳米粒子构造粗糙表面结构制备超疏水纺织品的局限性。首先采用有机硅树脂在织物表面形成一层疏水性薄膜,然后借助硅树脂的黏附性将十八胺牢固地固着在织物表面,以此达到构造粗糙表面结构和降低织物表面能的目的。实验结果表明,整理后的棉织物与水的接触角高达154.4°±0.6°,经、纬向强力分别下降了6.2%和8.3%,而白度增加了1.3%。棉织物表面经过30次机械摩擦后,其接触角为151.5°±0.4°。最后对改性前后棉织物的表面形貌和超疏水机理进行了深入分析。

    Abstract:

    The superhydrophobic cotton fabric was successfully obtained by a novel strategy, for which the limitation of what the additional nanoparticles were used frequently to construct hierarchical rough surface for fabricating superhydrophobic textiles was broken. Firstly, a hydrophobic film was formed on the cotton fabric surface by using the resin, and then the octadecylamine was firmly fixed on fabric surface based on the adhesion property of silicone resin. Therefore, the purpose of constructing a rough surface structure and reducing the fabric surface energy was achieved. The experimental results show that the contact angle of the modified cotton fabric with water is as high as 154.4°±0.6°. In addition, the warp and weft strength are decreased by 6.2% and 8.3%, respectively. However, the whiteness is increased by 1.3%. The contact angle still reaches 151.5°±0.4° after 30 times of mechanical friction. Finally, the surface morphology and superhydrophobic mechanism of cotton fabric before and after modification were discussed in depth.

    参考文献
    相似文献
    引证文献
引用本文

郑果林,苏青春,刘 帅,龙 柱,张 丹.棉织物表面的超疏水功能改性整理与性能表征[J].高分子材料科学与工程,2020,36(7):158-162. Guolin Zheng, Qingchun Su, Shuai Liu, Zhu Long, Dan Zhang. Superhydrophobic Functional Modification and Characterization of Cotton Fabric Surface[J]. Polymer Materials Science & Engineering,2020,36(7):158-162.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司