乙烯基MQ硅树脂补强液体硅橡胶的力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Mechanical Properties of Vinyl MQ Silicone Reinforced Liquid Silicone Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    液体硅橡胶内聚能密度小、力学强度低,是限制其应用的主要障碍。文中通过正硅酸酯法,合成了一种相对分子质量及乙烯基含量可控的MQ硅树脂,并研究了其对液体硅橡胶的补强作用。研究结果表明,与传统白炭黑补强液体硅橡胶相比,乙烯基MQ硅树脂补强液体硅橡胶的力学性能更优异。当乙烯基MQ硅树脂质量分数达到15%时,液体硅橡胶的拉伸强度达到7.2 MPa,撕裂强度达到44.7 kN/m,断裂伸长率达到453%,Shore A硬度达到53。特别地,乙烯基MQ硅树脂与液体硅橡胶的相容性良好,乙烯基MQ硅树脂补强液体硅橡胶的透光率大于80%,完全符合LED封装对液体硅橡胶力学性能和透光率的要求。

    Abstract:

    With small cohesive energy density and low mechanical strength, the liquid silicone rubber was obstructed for more applications. A kind of MQ silicone resin with controlled molecular weight and vinyl content was synthesized by the orthosilicate method,and the effect on reinforcing liquid silicone rubber was studied. The results show that this kind of MQ silicone resin has good compatibility with liquid silicone rubber, and the MQ silicone resin reinforced liquid silicone rubber has better mechanical properties than the traditional silica reinforced liquid silicone rubber. The mechanical properties of liquid silicone rubber are much better especially when the mass fraction of this kind of MQ silicone resin is 15%, the tensile strength is 7.2 MPa, the tear strength is 44.7 kN/m, the elongation at break is 453%, the Shore hardness is 53. And the transmission of light can be better than 80%, the properties of this kind of liquid silicone rubber match the needs of LED packaging.

    参考文献
    相似文献
    引证文献
引用本文

韩纪慧,叶素文,徐镇田,徐海涛,陈义旺.乙烯基MQ硅树脂补强液体硅橡胶的力学性能[J].高分子材料科学与工程,2020,36(7):169-175. Jihui Han, Suwen Ye, Zhentian Xu, Haitao Xu, Yiwang Chen. Mechanical Properties of Vinyl MQ Silicone Reinforced Liquid Silicone Rubber[J]. Polymer Materials Science & Engineering,2020,36(7):169-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-09-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司