固相缩聚法制备半芳香族聚酰胺纳米复合材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省重点研发项目(BE2019008)


Synthesis of Semi-Aromatic Polyamide Nanocomposites by Solid-State Polycondensation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以原位固相缩聚法合成出具有高相对分子质量的聚对苯二甲酰己二胺(PA6T)-co-聚己内酰胺(PA6)/有机蒙脱土(OMMT)纳米复合材料,分别对PA6T/OMMT的黏度、结构、形貌、热稳定性能以及力学性能进行了表征。结果表明,固相缩聚能够显著提高溶液缩聚产物的黏度;少量OMMT的加入可以改善基体的热稳定性,当OMMT质量分数为0.5%时,热稳定性能最佳;OMMT的加入使材料的力学性能得到改善,当OMMT质量分数为1%时,拉伸强度从纯样的84.3 MPa提高到114.4 MPa;X射线衍射分析和电镜结果表明形成了插层型纳米复合材料。

    Abstract:

    The intercalated and high molecular weight nanocomposites poly(hexamethylene terephthalamide) (PA6T) -co-polycaprolactam (PA6)/organic montmorillonite (OMMT) were successfully synthesized through in-situ solid-state polymerization. The intrinsic viscosity, structure, thermal stability and mechanical properties were systematically investigated and discussed. It is found that the solid-state polymerization can significantly increase the inherent viscosity of the solution polycondensation products, and the thermal stability and mechanical properties were improved with small amounts of OMMT. In particular, in comparison with the bulk resin, the tensile strength of the nanocomposite is increased from 84.3 MPa to 114.4 MPa with 1% OMMT. X-ray diffraction analysis and electron microscopy results indicate the formation of the intercalated structure in the nanocomposites.

    参考文献
    相似文献
    引证文献
引用本文

黄 佳, 童 心, 龙盛如, 杨 杰, 王孝军.固相缩聚法制备半芳香族聚酰胺纳米复合材料[J].高分子材料科学与工程,2020,36(8):51-57. Jia Huang, Xin Tong, Shenru Long, Jie Yang, Xiaojun Wang. Synthesis of Semi-Aromatic Polyamide Nanocomposites by Solid-State Polycondensation[J]. Polymer Materials Science & Engineering,2020,36(8):51-57.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-10-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司