Abstract:Aramid nanofibers (ANF) were prepared by dissolving para-aramid fibers (AF) in dimethyl sulfoxide (DMSO)/KOH system, and the effects of KH-550 modified nano-TiO2 on the UV resistance and mechanical properties of ANF films were studied. The surface morphology, chemical composition, heat resistance, mechanical properties and UV resistance of ANF films and composite films filled with modified nano-TiO2 were investigated by SEM, FT-IR, TG, tensile tester and yellowing resistance tester. The results show that when the mass fraction of nanoparticles is 4%, the mechanical properties of composite films reach the optimum, and the tensile strength is 139.83 MPa, which is 24.23% higher than that of ANF nano-films. In addition, after ultraviolet irradiation, the tensile strength of composite films (4%) is 149.92 MPa, 7.22% higher than that before irradiation. The results indicate that UV resistance and mechanical properties of the composite films have been greatly improved after the addition of modified nano-TiO2.