PPC/Si-g-PCL纳米复合材料的结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目 (51372059)


Structure and Properties of PPC/Si-g-PCL Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用一步法制备氨基化硅(Si)纳米粒子,然后与缩水甘油发生开环反应,在Si纳米粒子表面引入C-OH,引发己内酯(e-CL)开环聚合,制得Si-g-PCL复合纳米粒子,并以此对聚碳酸亚丙酯(PPC)进行改性。场发射透射电子显微镜、傅里叶变换红外光谱结果表明,Si纳米粒子和Si-g-PCL复合纳米粒子已成功制备。力学性能、热重分析测试结果表明,PPC/Si-g-PCL纳米复合材料的力学性能和热稳定性明显优于纯PPC与PPC/Si纳米复合材料。在Si-g-PCL复合纳米粒子的质量分数为3%时,纳米复合材料的拉伸强度与初始热分解温度分别提高了3 MPa与11.2 ℃;当Si-g-PCL复合纳米粒子的质量分数为2%时,纳米复合材料的冲击强度比PPC大约提高了3 kJ/m2。与纯PPC 相比,PPC/Si-g-PCL纳米复合材料的热稳定性有所提高,初始热分解温度提高了11.2 ℃。酶促降解实验结果表明,Si纳米粒子和Si-g-PCL复合纳米粒子改善了PPC的酶降解性能。Si-g-PCL复合纳米粒子的加入在不损害PPC生物降解性能下,提高了其力学性能、热稳定性和酶降解等性能,为PPC的改性和高值化应用提供了思路。

    Abstract:

    The aminated silicon (Si) nanoparticles were prepared by one step method and C-OH was bonded on the surfaces of Si nanoparticles via ring-opening reaction with glycidol, which initiated the ring-opening polymerization of e-caprolactone (e-CL) to obtain Si-g-PCL composite nanoparticles. The Si-g-PCL composite nanoparticles were used to modify poly(propylene carbonate) (PPC). The results of field emission transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR) show that Si nanoparticles and Si-g-PCL composite nanoparticles were prepared successfully. The results of mechanical properties and thermogravimetric analysis (TGA) indicate that the mechanical properties and thermal stability of PPC/Si-g-PCL nanocomposites are significantly better than those of pure PPC and PPC/Si nanocomposites. Moreover, the addition of 3% Si-g-PCL composite nanoparticles could improve the tensile strength and the initial thermal decomposition temperature of PPC by 3 MPa and 11.2 ℃, respectively. When the mass fraction of Si-g-PCL composite nanoparticles is 2%, the notched impact strength of the PPC/Si-g-PCL nanocomposite is improved by 3 kJ/m2 compared with pure PPC. Enzymatic degradation performance measurement reveals that Si nanoparticles and Si-g-PCL composite nanoparticles could promote the enzymatic degradation of PPC. The addition of Si-g-PCL composite nanoparticles could improve the mechanical properties, thermal stability and enzymatic degradation of PPC without impairing the biodegradability of PPC, providing an idea for the modification and high value application of PPC.

    参考文献
    相似文献
    引证文献
引用本文

亓文丽, 汪子健, 唐龙祥. PPC/Si-g-PCL纳米复合材料的结构与性能[J].高分子材料科学与工程,2020,36(8):74-80. Wenli Qi, Zhijian Wang, Longxiang Tang. Structure and Properties of PPC/Si-g-PCL Nanocomposites[J]. Polymer Materials Science & Engineering,2020,36(8):74-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-10-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司