核壳结构粉煤灰基复合粉体制备及填充聚合物的性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51804214)


Preparation of Core-Shell Fly Ash Based Composite and Its Application in Filling Polymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用化学沉淀法,以煅烧粉煤灰为原料,硫酸铝和硅酸钠为包覆剂,制备了核-壳结构纳米硅酸铝-煅烧粉煤灰复合粉体材料,探讨了复合粉体制备机理;将复合粉体填充尼龙6制备了尼龙6复合材料。采用扫描电镜、X射线衍射、红外光谱、比表面积、白度仪对复合粉体材料进行了表征。结果表明,粉煤灰表面包覆的是平均粒径为50 nm左右的非晶态硅酸铝,白度从27.1提高到58.3,比表面积从2.47 m2/g增大到24.21 m2/g。当pH值为13时,煅烧粉煤灰表面带负电荷,会吸附溶液中带相反电荷的Al3+,形成紧密吸附层,SiO32-则形成扩散层,在煅烧粉煤灰表面吸附形成稳定硅酸铝包覆层。复合粉体填充尼龙6力学性能和热变形温度优于未包覆煅烧粉煤灰粉体。

    Abstract:

    Core-shell structure nano aluminium silicate-calcined fly ash composite powders were prepared by the chemical precipitation method with calcined fly ash as raw material, aluminum sulfate and sodium silicate as coating agent. The preparation mechanism of the composite powder was discussed. Nylon 6 composites were prepared by filling the composite powders in nylon 6. The composite powders were characterized by SEM, XRD, FT-IR, BET and whiteness. The results show that the surface of fly ash is coated with amorphous aluminum silicate with an average particle size of about 50 nm, the whiteness is increased from 27.1 to 58.3, and the specific surface area is increased from 2.47 m2/g to 24.21 m2/g. When the pH value is 13, the surface of calcined fly ash has negative charge, thus adsorbing Al3+ with opposite charge to form a tight adsorption layer, while SiO32- will form a diffusion layer, thus forming a stable aluminum silicate coating layer on the surface of calcined fly ash. Nylon 6 filled with nano aluminum silicate-calcined fly ash composite powders has better mechanical properties and heat distortion temperature than nylon 6 filled with calcined fly ash.

    参考文献
    相似文献
    引证文献
引用本文

王彩丽, 王 静, 杨润全, 王怀法.核壳结构粉煤灰基复合粉体制备及填充聚合物的性能[J].高分子材料科学与工程,2020,36(8):87-92. Caili Wang, Jing Wang, Runquan Yang, Huaifa Wang. Preparation of Core-Shell Fly Ash Based Composite and Its Application in Filling Polymer[J]. Polymer Materials Science & Engineering,2020,36(8):87-92.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-10-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司