循环拉伸-松弛处理对聚二甲基硅氧烷/碳纳米管/碳纤维柔性力敏材料性能影响规律
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51503061);湖北省自然科学基金资助项目(2018AAA008,2015CFB322,2015BAA094);湖北省青年科技晨光计划(鄂科协办 [2018]79号)


Influence of Cycle Stretch-Relaxation Treatment on Performance of Polydimethylsiloxane/Carbon Nanotubes/ Carbon FiberFlexible Forcing-Sensitive Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了探究循环拉伸-松弛后处理对聚合物基柔性力敏材料性能的影响规律,文中以聚二甲基硅氧烷(PDMS)/碳纳米管(CNTs)/碳纤维(CF)柔性力敏材料为对象,测试其在循环拉伸-松弛处理期间及循环拉伸-松弛处理后电阻值随应变的变化,并从导电填料的局部重新分布的角度进行阐释。结果发现,循环拉伸-松弛处理后复合材料的电阻率降低可达到45%,且应变敏感性提高近4倍。这归因于循环拉伸-松弛处理过程中PDMS分子链段对导电填料的剪切作用使得导电填料经历局部重排,且循环拉伸-松弛过程所施加的应变越大,PDMS分子链段的剪切作用的影响越大,局部重排的效果会越明显。

    Abstract:

    In order to investigate the influence of cycle stretch-relaxation treatment on sensing performance of polymeric flexible conductors, the resistance change of polydimethylsiloxane (PDMS) / carbon nanotubes (CNTs)/ carbon fiber (CF) during the cycle treatment and resistance against strain for the composites after treatment was measured, then their mechanism was studied based on the local redispersion of fillers. The results show that the resistance of the composite after cycle stretch-relaxationtreatment is deceased by 40% and the gauge factors is increased almost 4 times. This is because the shearing of PDMS molecular segment lead to the local redistribution of conductive fillers during cycle treatment, and the higher strain during cycle stretch-relaxation treatment results in more obviously local redistribution.

    参考文献
    相似文献
    引证文献
引用本文

胡海龙, 许星烨, 应 程, 陈 海, 徐成成, 付旭东, 刘清亭, 胡圣飞, 张 荣.循环拉伸-松弛处理对聚二甲基硅氧烷/碳纳米管/碳纤维柔性力敏材料性能影响规律[J].高分子材料科学与工程,2020,36(8):93-97. Hailong Hu, Xingye Xu, Cheng Ying, Hai Chen, Chengcheng Xu, Xudong Fu, Qingting Liu, Shengfei Hu, Rong Zhang. Influence of Cycle Stretch-Relaxation Treatment on Performance of Polydimethylsiloxane/Carbon Nanotubes/ Carbon FiberFlexible Forcing-Sensitive Materials[J]. Polymer Materials Science & Engineering,2020,36(8):93-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-10-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司