Cp′Ti(OAr)Cl2/[Ph3C]+[B(C6F5)4]-催化体系 合成高相对分子质量无规聚丙烯弹性体
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis of High Molecular Weight Atactic Polypropylene Elastomer by Catalytic System of Cp′Ti(OAr)Cl2/[Ph3C]+[B(C6F5)4]-
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以相应的Cp′TiCl3为原料(Cp′为取代环戊二烯基)制备了3种非桥联单茂金属催化剂1,2,3,4,5-五甲基-环戊二烯基-2,4,6-三叔丁基酚氧基二氯化钛(A)、1-苯基-2,3,4,5-四甲基-环戊二烯基-2,4,6-三叔丁基酚氧基二氯化钛(B)和1,2-二苯基-4-甲基-环戊二烯基-2,4,6-三叔丁基酚氧基二氯化钛(C)。研究了铝钛摩尔比(n(Al)/n(Ti))和温度(T)对催化剂的活性及聚合物相对分子质量(Mw)的影响。结果显示,应用Al(iBu)3-[Ph3C]+[B(C6F5)4]-助催化剂,在合适的Al/Ti(摩尔比160)和温度(70 ℃)下,3种配合物催化丙烯聚合均具有良好的催化活性(5.15×106~6.12×106 gPP/(mol Ti·h)),可以制备出高相对分子质量(Mw=8.54×104~29.26×104)无规聚丙烯弹性体。

    Abstract:

    Three non-bridged titanium (IV) cyclopentadienyl-aryloxy complexes such as 1,2,3,4,5-pentamethyl-cyclopentadienyl-2,4,6-tri-tert-butylphenoxytitanium(IV) dichloride (A), 1-phenyl-2,3,4,5-tetramethyl-cyclopentadienyl-2,4,6-tri-tert-butylphenoxytitanium(IV)dichloride (B) and 1,2-diphenyl-4-methyl-cyclopentadienyl-2,4,6- tri-tert-butylphenoxytitanium(IV) dichloride (C) could be prepared from corresponding Cp′TiCl3 (Cp′=cyclopentadienyl). The influence of the mole ratio of Al/Ti (n(Al)/n(Ti)) and temperature (T) on the catalytic activity and the polymer molecular weight (Mw) was investigated. The results show that when activated by Al(iBu)3-[Ph3C]+[B(C6F5)4]- cocatalyst, three complexes show higher catalytic activities for the propylene polymerization (5.15×106~6.12×106 g PP/(mol Ti·h)) and the atactic polypropylene elastomers with high molecular weight (Mw=8.54×104~29.26×104) could be produced through propylene polymerization at the suitable mole ratio of Al/Ti (160) and temperature(70 ℃).

    参考文献
    相似文献
    引证文献
引用本文

吕春胜, 成 名, 许 普, 翟 雪. Cp′Ti(OAr)Cl2/[Ph3C]+[B(C6F5)4]-催化体系 合成高相对分子质量无规聚丙烯弹性体[J].高分子材料科学与工程,2020,36(9):22-31. Chunsheng Lü, Ming Cheng, Pu Xu, Xue Zhai. Synthesis of High Molecular Weight Atactic Polypropylene Elastomer by Catalytic System of Cp′Ti(OAr)Cl2/[Ph3C]+[B(C6F5)4]-[J]. Polymer Materials Science & Engineering,2020,36(9):22-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-11-13
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司