含聚碳化二亚胺的高固含量聚酯型聚氨酯分散体的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51673073)


Synthesis and Characterization of High Solid Content Polyester Polyurethane Dispersions Containing Polycarbodiimide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以四甲基苯二甲基二异氰酸酯(TMXDI)为原料合成了聚碳化二亚胺(PCDI),然后以PCDI、聚己二酸丁二醇酯二醇(PBA)、六亚甲基二异氰酸酯(HDI)与异佛尔酮二异氰酸(IPDI)、乙二胺基乙磺酸钠(AAS-Na)、异佛尔酮二胺(IPDA)为原料合成了固含量50%以上的聚氨酯分散体(PUD)。利用傅里叶变换红外光谱表征了N=C=N的结构;PUD的ξ电位处于-46~-62 mV,分散体稳定性能优异;透射电镜显示,分散体胶粒呈现大小不一的球形结构。含PCDI嵌段的聚酯型聚氨酯其耐水解性和力学性能都得到显著提升。研究对比发现,PCDI的最佳聚合度为4,PCDI的最佳质量分数为3%。

    Abstract:

    Polycarbodiimide (PCDI) was synthesized with tetramethylxylylene diisocyanate (TMXDI).Then polyurethane dispersions (PUD) with the solid content above 50% was prepared with polycarbodiimide(PCDI)based on tetramethylxylylene diisocyanate (TMXDI), polybutylene adipate diol (PBA), hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI), sodium ethylenediamine sulfonate (AAS-Na), isophorone diamine (IPDA). The structure of N=C=N was confirmed by FI-IR; the zeta potential of PUD is between -46 mV and -62 mV, and the stability of the dispersion is excellent; the transmission electron microscopy (TEM) results show that the dispersion colloidal particles exhibit spherical structures with different sizes. The polyester polyurethane containing PCDI has a significant improvement in hydrolysis resistance and mechanical properties. The comparison shows that the best polymerization degree of PCDI is 4, the optimum mass fraction of PCDI is 3%.

    参考文献
    相似文献
    引证文献
引用本文

田仪长, 孙东成.含聚碳化二亚胺的高固含量聚酯型聚氨酯分散体的合成与表征[J].高分子材料科学与工程,2020,36(9):40-45. Yichang Tian, Dongcheng Sun. Synthesis and Characterization of High Solid Content Polyester Polyurethane Dispersions Containing Polycarbodiimide[J]. Polymer Materials Science & Engineering,2020,36(9):40-45.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-11-13
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司