蒙脱土用量对天然胶乳/蒙脱土/石墨烯复合材料性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-山东省人民政府海洋科学研究中心联合资助项目(U1606401);国家自然科学基金资助项目(51803010);青岛市科技发展计划项目(17-6-3-16-gx)


Effect of Soil Removal Dosage on Performance of Natural Latex/Masked Soil/Graphene Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用乳液插层法制备了纳米蒙脱土(MMT)/石墨烯(GE)/天然胶乳(NL)复合材料,用MMT代替炭黑作为补强体,GE作为润滑相促进MMT分散。利用扫描电镜和红外光谱对复合材料的微观结构和插层间距进行表征,利用压差法气体渗透仪对试样的气体阻隔性能进行测试,利用差示扫描量热仪和万能材料拉力机对复合材料的玻璃化转变温度和拉伸性能进行测试。研究了不同MMT含量对复合材料的形貌影响,扫描电镜和红外光谱结果表明当MMT用量为10 phr时,与橡胶基体的结合好且插层间距最大,其物理力学性能最优。

    Abstract:

    Nanometer montmorillonite (MMT) /graphene (GE) / natural latex (NL) composites were prepared by emulsion intercalation method. MMT was used as reinforcement instead of carbon black, and GE was used as lubricant phase to promote the dispersion of MMT. SEM and XRD were utilized to characterize the microstructure and interlayer spacing of the composite material, and the gas barrier properties of the sample were tested by differential pressure gas permeator. The glass transition temperature and tensile properties were characterized by DSC and universal tension machine. The effects of different MMT contents on the morphology of composites were investigated. Scanning electron microscopy and infrared spectroscopy results show that when the amount of MMT is 10 phr, the adhesiveness of the rubber matrix is accomplished and the interlayer spacing is the largest.

    参考文献
    相似文献
    引证文献
引用本文

林广义, 吕宁宁, 王洪浩, 王 佳, 胡亚菲, 刘彦昌, 于凯本.蒙脱土用量对天然胶乳/蒙脱土/石墨烯复合材料性能的影响[J].高分子材料科学与工程,2020,36(10):8-14. Guangyi Lin, Ningning Lü, Honghao Wang, Jia Wang, Yafei Hu, Yanchang Liu, Kaiben Yu. Effect of Soil Removal Dosage on Performance of Natural Latex/Masked Soil/Graphene Composites[J]. Polymer Materials Science & Engineering,2020,36(10):8-14.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-12-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司