聚丙烯酸丁酯/聚甲基丙烯酸甲酯核壳粒子的制备及在环氧树脂中的分散与增韧
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis of Polybutyl Acrylate/Polymethyl Methacrylate Core Shell Particles and Their Dispersing and Toughening in Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用原位乳液聚合法成功合成了具有核壳结构的聚丙烯酸丁酯(PBA)/聚甲基丙烯酸甲酯(PMMA)纳米粒子,研究了其在环氧树脂中的分散。通过红外光谱研究了PBA/PMMA粒子与环氧树脂间的相互反应,粒径测试和扫描电镜分析表明核壳粒子在环氧树脂基体中具有良好的分散性。将其用于环氧树脂增韧,探究了粒子核壳比以及粒子添加量对环氧树脂增韧效果的影响。结果表明,加入PBA/PMMA粒子以后,环氧树脂的冲击强度明显增加,核壳比在1∶1.5以下时,PBA/PMMA核壳比例的变化对环氧树脂冲击强度影响不大。环氧树脂的冲击强度随着粒子含量的增加而增加,核壳比为1∶1.5的PBA/PMMA核壳粒子添加量在15%时,其冲击强度可达到为23.2 kJ/m2,是纯环氧树脂的2.7倍且拉伸强度无明显下降。

    Abstract:

    Polybutyl acrylate(PBA)/ polymethyl methacrylate(PMMA) nanoparticles with core-shell structure were successfully synthesized by in situ emulsion polymerization.Their dispersion performance in epoxy resin was investigated.The interaction between PBA/PMMA particles and epoxy resin was studied by infrared spectroscopy.The results from the particle size measurement and scanning electron microscopy show that core-shell particles show good dispersion in the epoxy resin matrix.The effects of core-shell ratio and the amounts of PBA/PMMA nanoparticles on toughening epoxy resin were investigated.The results show that the impact strength of epoxy resin is obviously increased after the addition of PBA/PMMA core-shell particles, and the PBA/PMMA core-shell ratio has little effect on the impact strength of epoxy resin when the core shell ratio is less than 1∶1.5.The impact strength of epoxy resin increases with the increment of particle content in epoxy resin.When the mass fraction of PBA/PMMA core-shell particles with the core-shell ratio of 1∶1.5 is 15%, the impact strength of epoxy resin reaches 23.2 kJ/m2, which is 2.7 times higher than that of pure epoxy resin.

    参考文献
    相似文献
    引证文献
引用本文

黄 力, 李林娟, 李 坚, 任 强, 汪称意.聚丙烯酸丁酯/聚甲基丙烯酸甲酯核壳粒子的制备及在环氧树脂中的分散与增韧[J].高分子材料科学与工程,2020,36(10):36-43. Li Huang, Linjuan Li, Jian Li, Qiang Ren, Chenyi Wang. Synthesis of Polybutyl Acrylate/Polymethyl Methacrylate Core Shell Particles and Their Dispersing and Toughening in Epoxy Resin[J]. Polymer Materials Science & Engineering,2020,36(10):36-43.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-12-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司