弹性体/聚丙烯与塑性体/聚丙烯复合材料的力学及介电性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51337002)


Mechanical and Dielectric Properties of Elastomer/Polypropylene and Plastomer/Polypropylene Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用聚丙烯(PP)为基体树脂,分别以乙烯-辛烯共聚弹性体(POE)、丙烯-乙烯共聚塑性体(POP)为填料,制备出不同组分的POE/PP与POP/PP共混材料。对共混体系的力学性能研究表明,POP在降低PP弹性模量及增韧改性效果上均弱于同含量的POE/PP体系,但当POP质量分数增至40%时与POE质量分数为30%时的力学性能相仿;而电导电流及交、直流击穿等实验表明,POP较POE更大程度维持了纯PP的电性能;观测共混体系的微观形态发现POE在PP中的分散性较差,而共聚单体含量较少的POP对PP结晶规整度破坏较弱,相近分子结构呈现出与PP较好的相容性,是POP/PP体系电性能较优异的原因,具有潜在的工程应用价值。

    Abstract:

    PP was used as matrix resin, polyolefin elastomer(POE) and polyolefin plastomer(POP) were used as filler to prepare POE/PP and POP/PP with different components. The results of the mechanical properties of the blending system show that POP is weaker than POE at the same content for reducing elastic modulus of PP and effects of toughening modification, however when the POP content is increased to 40%, its mechanical properties are similar to those with the POE content of 30%; the electrical conductivity and alternating current/direct current (AC/DC) breakdown strength show that POP can highly maintain the electrical properties of PP; by observing the microscopic morphologies of the blends, it is found that the dispersion of POE in PP is poor, and POP at less monomer content shows less damage to the crystal regularity of PP, and the similar molecular structure of POP shows better compatibility with PP, which is the reason for the superior electrical properties, representing potential engineering application value.

    参考文献
    相似文献
    引证文献
引用本文

赵 洪, 袁 鑫, 杨佳明, 赵新东, 石庆铎, 何乐春, 杨 旭.弹性体/聚丙烯与塑性体/聚丙烯复合材料的力学及介电性能[J].高分子材料科学与工程,2020,36(10):44-50. Hong Zhao, Xin Yuan, Jiaming Yang, Xindong Zhao, Qingduo Shi, Lechun He, Xu Yang. Mechanical and Dielectric Properties of Elastomer/Polypropylene and Plastomer/Polypropylene Composites[J]. Polymer Materials Science & Engineering,2020,36(10):44-50.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-12-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司