Abstract:The flame retardant samples of hydrotalcite (Zn-Mg-Al-LDHs) and rare earth-containing La-modified hydrotalcite (Zn-Mg-Al-La-LDHs) flame retardant were prepared by coprecipitation method.The characteristics were analyzed by XRD and SEM-EDS. The simultaneous thermal analyzer, limit oxygen index and the cone calorimeter test were adopted to learn the effects of hydrotalcite and rare earth-containing La-modified hydrotalcite flame retardants on the flame retardancy and smoke suppression performance of silicone rubber foam (SRF). The result show that Zn-Mg-Al-LDHs and Zn-Mg-Al-La-LDHs have been successfully producted. Furthermore, by adding both to SRF, the vertical combustion grades reach to the V-0 level. When the addition amount raises to 20%, the limiting oxygen index (LOI) of Zn-Mg-Al-La-LDHs/SRF is up to 32.8%. A dense protective carbon layer is formed on the surface of the SRF combustion residue before and after the modification. In particular, the carbon layer of 5%-added Zn-Mg-Al-La-LDHs/SRF is denser. Compared to SRF without flame retardant, the peak of heat release rate (PHRR) and smoke release rate (PSPR) with added 5% Zn-Mg-Al-La-LDHs are reduced by 56.5% and 59.5%, respectively. Both Zn-Mg-Al-LDHs and Zn-Mg-Al-La-LDHs improve the thermal stability of SRF. When the mass fraction of both is 5%, the rate of residual carbon residue of the SRF is increased by 15.69% and 10.84%, respectively.