Abstract:Poly(AAc-co-AM) hydrogels containing different mole ratios of acrylic acid (AAc)/ acrylamide (AM) were prepared by free radical polymerization. The initial poly(AAc-co-AM)/ Fe3+ coordination hydrogels were obtained by soaking them in FeCl3 solution and then after equilibrium swelling in deionized water,named as AY-x-Fe. The poly(AAc-co-AM)/ Fe3+ coordination hydrogels with the water content of about 40% were obtained by air dried dehydration, named as Ad-x-Fe. The mechanical properties of AY-x-Fe, Ad-x-Fe hydrogels were characterized by INSTRON-5567 electronic stretcher. The results show that the mechanical properties of coordination hydrogels are significantly improved after dehydration. The fracture strain of AY-Fe and Ad-Fe hydrogel is 500%~800% and 550%~1700%, respectively. The fracture stress of AY-Fe and Ad-Fe hydrogel is 0.29~6 MPa, 2.59~14 MPa respectively. The cross-section network structure and Fe element of AY-1-Fe, Ad-1-Fe hydrogels were characterized by the combination of scanning electron microscope (SEM) and elemental energy spectrometer (EDS). The results demonstrate that the density of Fe element in the Ad-1-Fe matrix is larger than that of AY-1-Fe, thus facilitating the coordination between Fe3+ and carboxyl groups. The coordination interactions and hydrogen bonding of the AY-1-Fe, Ad-1-Fe hydrogel were tested by FT-IR and UV.