Abstract:Y-shaped spinneret was used to prepare the profiled Lyocell fibers by dry-wet spinning. The effects of pump flux and spinning solution concentration on the cross-section shape, non-roundness factor and tensile properties of the fibers were studied by SEM, optical microscopy and tensile tester. The results show that although the spinneret orifice is Y-shaped, the cross sections of the obtained Lyocell fibers are similar to triangle due to the die-swell behavior. With the increase of pump flux, the non-roundness factor of fiber decreases slightly, whereas the mechanical properties of fiber increase firstly and then stabilize. When the pump flux is 16 g/min, the triangular-like Lyocell fiber with higher non-roundness factor and the highest tensile strength can be obtained. With the increase of the concentration of spinning solution, the cross-sectional shape of fiber becomes more like the shape of the spinneret hole, the non-roundness factor of fiber increases gradually, and the mechanical properties of Lyocell fiberalso increase. The Y-shaped Lyocell fiber show the best cross-sectional shape and mechanical properties when the concentration of the spinning solution is 13%.