基于超临界流体发泡技术制备开孔型微孔塑料的研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51703054);湖北省自然科学基金项目(2017CFB284);湖北省教育厅青年人才项目(Q20171409)


Progress in Preparation of Open-Cell Microcellular Plastics Based on Supercritical Fluid Foaming Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    开孔型微孔塑料因其独特的三维互通结构而具有优异的吸收和穿透能力,作为功能高分子材料被广泛应用在吸音降噪、吸附过滤、催化载体、电磁屏蔽、组织工程等领域。超临界流体(sc-CO2,sc-N2)作为物理发泡剂在塑料基体中溶解度大,同时具有无毒环保、价廉易得等优势,使得超临界流体发泡技术在制备开孔型微孔塑料方面有巨大的应用前景,并成为当前研究热点。文中首先总结了基于超临界流体发泡技术制备开孔型微孔塑料的几种开孔机理,然后综述了开孔型微孔塑料制备方法及其应用领域的最新研究进展,最后对目前基于超临界流体发泡技术制备开孔型微孔塑料面临的问题进行分析和展望。

    Abstract:

    The open-cell microcellular plastics have excellent absorption and penetration ability due to its unique three-dimensional interconnecting structure, and were widely used as functional polymer in fields of acoustic absorption, filtration, catalytic carrier, electromagnetic shielding, and tissue engineering. Supercritical fluids (sc-CO2, sc-N2), as physical blowing agent, have the advantages of high solubility in plastic matrix, non-toxic, environment-friendly, cheap and easy obtained, so that the supercritical fluid foaming technology has a great application in the preparation of open-cell microcellular plastics, and has become the current research hotspot. Firstly, it was summarized about several opening mechanisms of open-cell microcellular plastics prepared by supercritical fluid foaming technology, and then the preparation and application of open-cell microcellular plastics were reviewed. Finally, the problems existing in the fabrication of open-cell microcellular plastics by supercritical fluid microcellular foaming were analyzed and prospected.

    参考文献
    相似文献
    引证文献
引用本文

余 鹏, 樊丽君, 杨永潮, 张 杰, 郭宇芳, 陈绪煌.基于超临界流体发泡技术制备开孔型微孔塑料的研究进展[J].高分子材料科学与工程,2020,36(10):160-169. Peng Yu, Lijun Fan, Yongchao Yang, Jie Zhang, Yufang Guo, Xuhuang Chen. Progress in Preparation of Open-Cell Microcellular Plastics Based on Supercritical Fluid Foaming Technology[J]. Polymer Materials Science & Engineering,2020,36(10):160-169.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-12-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司