树脂基复合材料成型用炭泡沫模具技术的研究现状
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Technology of Carbon Foam Tooling for Polymer Matrix Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    炭泡沫是一种由孔泡和相互连接的孔泡壁组成的具有三维网状结构的多孔材料,具备强度高、密度低、热电性能可调、热膨胀系数低、耐高温、可设计性强、易加工等特点。用其做成的树脂基复合材料成型模具在模具制造、质量、变形、可维修、运输等方面都具有明显优势。文中先综述了模具用炭泡沫材料和炭泡沫模具技术发展,然后与传统模具对比说明炭泡沫模具的性能优势,进而对炭泡沫模具设计和制造中的关键技术进行归纳,最后对国内开展炭泡沫模具的研发提出建议。

    Abstract:

    The coal-based carbon foam is open cell, porous carbon with interconnected pores and possesses characteristics such as high strength, light weight, tailorable thermal and electrical conductivity, low coefficient of thermal expansion (CTE), high temperature resistant, strong designability and machinability, etc., which shows tremendous advantage over other materials when used to manufacture carbon foam-based polymer matrix composites tooling products. In this paper, firstly, the development of carbon foam was reviewed. Secondly, the development of carbon foam tooling was reviewed. Thirdly, the properties of carbon foam tooling were summarized. Fourthly, the key techniques in the design and manufacture of carbon foam tooling were generalized. Finally, some suggestions for the investigation of carbon foam tooling were put forward.

    参考文献
    相似文献
    引证文献
引用本文

李小琪, 庄淇凯, 王志勇, 张 利, 程小全, 李 凯.树脂基复合材料成型用炭泡沫模具技术的研究现状[J].高分子材料科学与工程,2020,36(10):177-184. Xiaoqi Li, Qikai Zhuang, Zhiyong Wang, Li Zhang, Xiaoquan Cheng, Kai Li. Technology of Carbon Foam Tooling for Polymer Matrix Composites[J]. Polymer Materials Science & Engineering,2020,36(10):177-184.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-12-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司