Abstract:Due to the problems such as the poor compatibility of bio-based flame retardant system and their complex synthesis processes with large amounts of organic solvents, the core-shell intumescent flame retardant APP@CS@PA-Na, with ammonium polyphosphate (APP) as "core" , chitosan (CS) and sodium phytate (PA-Na) as "shell", was prepared by aqueous self-assembly method . The effects of different additions of APP@CS@PA-Na on flame retardancy, thermal degradation and mechanical properties of polylactic acid (PLA) were studied. The results show that when the mass fraction of APP@CS@PA-Na is 10%, PLA can pass the UL94 V0 and its limited oxygen index reaches 30.5%; the peak heat release rate and total heat release rate are decreased by 33.0% and 19.4% respectively. Through the residual char analysis, it is found that APP@CS@PA-Na can not only promote the charring of PLA, but also improve the phosphorus content and graphitization degree of the char. The amount of APP@CS@PA-Na is an important factor affecting the "quality" and "quantity" of the protective carbon layer. The thermal gravimetric analysis in N2 also show that it can promote the charring behavior. The appropriate amount of APP@CS@PA-Na could endow PLA with a certain toughening effect. The elongation at break and impact strength of PLA with 10% APP@CS@PA-Na are increased by 28% and 17% respectively compared with pure PLA.