螺环磷-氮协同反应型阻燃剂的合成及在环氧树脂中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21376182)


Synthesis of Spiro-Phosphorus-Nitrogen Synergistic Flame Retardant and Its Application in Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以三丙酮二胺、季戊四醇和三氯氧磷为原料,通过一锅法制备出一种新型环氧树脂反应型阻燃固化剂SPDPT,通过傅里叶变换红外光谱、核磁共振氢谱和磷谱,证明SPDPT制备成功。以4’,4-二氨基二苯砜(DDS)为共固化剂,共同固化环氧树脂制备了本征型阻燃环氧固化物(EP/DDS/SPDPT)。热重分析结果表明,SPDPT的加入能提高EP热固性材料燃烧后的残炭量。当磷质量分数为1.0%时,EP/DDS/SPDPT-4样品的LOI值为26.4%,UL94达到V-0级。在环氧固化物中,其拉伸强度最高达到了37.2 MPa,弯曲强度最高达到了63.8 MPa,冲击强度最高达到了21.6 kJ/m2。

    Abstract:

    A novel epoxy resin reactive flame retardant curing agent SPDPT was prepared by one-pot method using triacetone diamine, pentaerythritol and phosphorus oxychloride as raw material. The preparation of SPDPT was proved by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and phosphorus spectroscopy. The intrinsic flame retardant epoxy cured product (EP/DDS/SPDPT) was prepared by co-curing epoxy resin with 4',4-diaminodiphenyl sulfone (DDS) as co-curing agent. Results of TG show that the addition of SPDPT can increase the amount of carbon residue after burning of EP thermosetting materials. When the mass fraction of phosphorus is 1.0%, the LOI value of the EP/DDS/SPDPT-4 sample is 26.4%, and the UL94 reaches the V-0 level. In the epoxy cured product, the tensile strength rises up to 37.2 MPa, the bending strength reaches 63.8 MPa, and the impact strength is 21.6 kJ/m2.

    参考文献
    相似文献
    引证文献
引用本文

曹 宇, 彭永利, 梁 祎.螺环磷-氮协同反应型阻燃剂的合成及在环氧树脂中的应用[J].高分子材料科学与工程,2020,36(11):64-68. Yu Cao, Yongli Peng, Yi Liang. Synthesis of Spiro-Phosphorus-Nitrogen Synergistic Flame Retardant and Its Application in Epoxy Resin[J]. Polymer Materials Science & Engineering,2020,36(11):64-68.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-02-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司