Abstract:Triboelectric Nanogenerator (TENG) is based on triboelectric effect and electrostatic induction, and can collect and convert various mechanical energy into electrical energy. TENG has the characteristics of low cost, light weight, environmentally friendly and safety, and high conversion efficiency at low frequencies, and can be used as continuous power supply for wearable devices. In this paper, polyborosiloxane/carbon nanotube composites were used to prepare TENG electrodes, and silicon rubber was used to encapsulate the electrodes to prepare an integrated fully flexible TENG. The morphology, mechanical properties, electrical properties of the flexible electrode and the basic output performance of the flexible TENG were characterized. At a frequency of 3 Hz and a separation distance of 5 cm, the peak output voltage and short-circuit current of the integrated TENG can reach 100 V and 1.2 μA respectively, and the amount of charge transferred in a single cycle is 0.038 μC. It is shown that when the relative movement distance of the friction layer increases from 1 cm to 5 cm, the open circuit voltage, short circuit current and transfer charge are increased by 19.4%, 126.7% and 20.1%, respectively. The fabricated TENG was integrated with capacitor as self-powered system, which can supply power to electronic watches and calculators, and its application in human motion monitoring was further studied.