Abstract:Developing novel materials with simultaneously good mechanical properties and excellent CO2 gas adsorption behavior plays an important role in mitigating the greenhouse effect caused by excessive CO2 emissions. In this paper, a polyimide (PAS) and polyimide nanofiber was used as raw material to prepare a polyimide (PI) aerogel with a layered pore structure. Subsequently, ZIF-8 was loaded on the pore walls of PI aerogel by in-situ growth to obtain a PI/ZIF-8 composite aerogel. These composite aerogels prepared in this paper combine the high porosity of ZIF-8 and the good affinity of imide units in the main chains of polyimide for CO2. When the ZIF-8 loading reaches 44.3%, the adsorption amount of CO2 is approximately 0.79 mmol/g, which is higher than that of ZIF-8 (0.69 mmol/g) and pure PI (0.3 mmol/g) aerogel. Meanwhile, the mechanical strength of PZA-n composite aerogels increases with the increase of ZIF-8 loading. Under the 40% strain, the compressing stress of PZA-30 is 19.8 kPa, which is higher than that of pure PI aerogel, while it still maintains a good compression recovery.