含醚疏水缔合聚合物的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项(2017ZX05013)


Synthesis and Properties of Etherhydrophobically Associating Polymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用壬基酚聚氧乙烯醚(TX-10)与氯丙烯合成了一种含醚单体(TXA),再用丙烯酰胺(AM)、丙烯酸(AA)与TXA采用自由基聚合法合成了疏水缔合聚丙烯酰胺(TXPAM)。确定了TXPAM的最佳合成条件为:n(AM)∶n(AA)∶n(TXA)=100∶20∶0.4,总单体含量为20%,体系pH为6.5,反应温度为40 ℃,引发剂加量0.2%,反应时间为5 h。采用红外光谱法和核磁共振氢谱对TXPAM的结构进行了表征,采用元素分析法对TXPAM的C,H,O,N元素的含量进行了测定,3种表征方法证实了TXPAM符合预期设计。考察了TXPAM的耐温抗盐抗剪切性能和驱油性能,与常规PAM相比,耐温达到80 ℃,抗盐8000 mg/L,抗剪切10000 s-1,提高采收率16.03%,有进一步研究的意义。

    Abstract:

    An ether containing monomer (TXA) was synthesized with nonylphenol ethoxylate (TX-10) and chloropropene (AA). Then, the hydrophobically associating polyacrylamide (TXPAM) was synthesized by free radical polymerization of acrylamide (AM), acrylic acid (AA) and TXA. The optimum synthesis conditions of TXPAM were studied, n(AM)∶n(AA)∶n(TXA)=100∶20∶0.4, total monomer content of 20%, pH of 6.5, reaction temperature of 40 ℃, initiator dosage of 0.2%, reaction time of 5 h. The structure of TXPAM was characterized by IR and 1H-NMR. The contents of C, H, O and N in TXPAM were determined by elemental analysis. The three characterization methods confirm that TXPAM meets the expected design. Compared with conventional PAM, TXPAM has a temperature resistance of 80 ℃, salt resistance of 8000 mg/L, shear resistance of 10000 s-1 and enhanced oil recovery of 16.03%, which is significant for further study.

    参考文献
    相似文献
    引证文献
引用本文

蒋筑阳, 杨 欢, 于小荣, 唐雨苗, 李 洋, 王凯璐.含醚疏水缔合聚合物的合成及性能[J].高分子材料科学与工程,2020,36(12):109-115. Zhuyang Jiang, Huan Yang, Xiaorong Yu, Yumiao Tang, Yang Li, Kailu Wang. Synthesis and Properties of Etherhydrophobically Associating Polymer[J]. Polymer Materials Science & Engineering,2020,36(12):109-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2021-03-25
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司